Gearbox failure causes: Gearbox Failure and Downtime
The median published figure in the Gearbox Failure and Downtime is 70 percent across 2 sources' own pages (range 64 to 76 percent), read 11 November 2026.
2 of the 5 named sources read in full publish a figure; 3 publish none, read 11 November 2026.
The median is unchanged since 18 October 2026 (was 70 percent across 2).
Every figure, with its source
One row per published figure: the figure as the source's own page publishes it, the page, and the day it was read. A figure that is not on a page we read is not on this one.
The sentence each figure was read from (2)
- US Department of Energy - bearing problems cause the majority of wind turbine gearbox failures, read 2026-11-11:
According to the latest statistics from the database, the majority of wind turbine gearbox failures (76%) are caused by the bearings.
- OpenEI - 2014 wind turbine gearbox damage distribution, NREL Gearbox Reliability Database, read 2026-11-11:
The majority of the damage occurs to bearings (64%), followed by gears (25%), and the other components account for 11% of the failures.
Read in full, publishes no figure
3 named sources were read in full on the dates shown and print no usable figure. They are counted, never filled in.
- Data.gov - 2014 wind turbine gearbox damage distribution dataset, read 2026-11-11: every candidate on the page was refused
- ONS - manufacture of machinery and equipment n.e.c., total output, read 2026-11-11: read in full and no accepted figure on the page
- ONS - manufacture of machinery and equipment n.e.c., home sales, read 2026-11-11: read in full and no accepted figure on the page
Methodology
Every row is a verbatim sentence read from the named source's own page through our fetch service on the date shown, hash-pinned to the stored read (the sha of the page's visible text; the raw page is mirrored to R2).
2 of the 5 named sources that could be read published a usable figure; 3 published none and are recorded as not published, never filled in; 0 could not be read (blocked, dead or unreachable) and count nowhere.
The headline figures (median, minimum, maximum, quartiles) are over ONE figure per source in % (a source's median where its page yielded several accepted sentences), so N counts sources, never sentences; 12 candidate sentence(s) were refused by a reviewer with the reason recorded.
The fuller derivation this dataset is chartered to grow into (not yet what the figures above are; they are each source's own published figure as read): the failure-mode split - bearings, gears, everything else - as the one large public gearbox damage population states it, tracked ACROSS ITS RELEASES rather than quoted once: the same NREL Gearbox Reliability Database reads 64% bearings / 25% gears / 11% other on the 2014 distribution and 76% / 17.1% / 6.9% on the later statistics, and that MOVEMENT is the finding, because it says what the industry learned to look for.
Set beside the UK machinery output series it gives the derivation this site owes its buyer: a strip-down finds a bearing three times in four, which is why the honest estimate before the strip is a range and not a number, and why the cheap oil sample beats the expensive guess.
The population is wind turbine gearboxes and the charter says so on the page - it is the only large failure population anyone publishes, and it is used for the SPLIT between failure modes, never as a UK repair statistic.
12 candidate sentences on these pages were refused by a reviewer; each refusal and its reason is recorded in the review ledger.
Sources (5)
- US Department of Energy - bearing problems cause the majority of wind turbine gearbox failures(the publisher's own terms; quoted for reporting and comment)
- OpenEI - 2014 wind turbine gearbox damage distribution, NREL Gearbox Reliability Database(the publisher's own terms; quoted for reporting and comment)
- Data.gov - 2014 wind turbine gearbox damage distribution dataset(the publisher's own terms; quoted for reporting and comment)
- ONS - manufacture of machinery and equipment n.e.c., total output(the publisher's own terms; quoted for reporting and comment)
- ONS - manufacture of machinery and equipment n.e.c., home sales(the publisher's own terms; quoted for reporting and comment)
Cite or embed this figure
The median published figure in the Gearbox Failure and Downtime is 70 percent across 2 sources' own pages (range 64 to 76 percent), read 11 November 2026.
2 of the 5 named sources read in full publish a figure; 3 publish none, read 11 November 2026.
The median is unchanged since 18 October 2026 (was 70 percent across 2).
Cite as: "gearboxrepairquotes.co.uk Gearbox Failure and Downtime", updated 2026-11-12, https://gearboxrepairquotes.co.uk/datasets/gearbox-failure-and-downtime/.
Download the CSV (2 rows, computed 2026-11-12)
Get gearbox repair quotes
Two minutes of questions; gearbox specialists quote you directly. Free, no obligation.
Questions this data answers
Why do gearboxes fail, in what proportions, and what is the machine's downtime worth while it is being decided?
The median published figure in the Gearbox Failure and Downtime is 70 percent across 2 sources' own pages (range 64 to 76 percent), read 11 November 2026.
Where do the figures in the Gearbox Failure and Downtime come from?
Every figure is quoted from its source's own page and dated (last read 11 Nov 2026). 5 named sources were read and 2 publish a figure; the 3 that publish none are recorded as not published, never estimated.